Limited Time Offer!
Selling Price -$359,900.00
Selling Price -
$359,900.00
2018 Case IH Steiger® Series Steiger® 580 Wheeled
The Steiger® 580, featuring a 12.9 L Tier 4 B/Final engine, is a heavy duty, high horsepower tractor providing the power and fuel efficiency you need. Available configurations: HD Wheeled, Quadtrac®, HD Wheeled Scraper and Quadtrac® Scraper.
- 2018
- Case IH
- Steiger® Series
- Steiger® 580 Wheeled
- 4WD
- 12.9 L, Two-Stage Turbo
- Case IH FPT
- Advertised: 580 HP (433 kW) | Maximum: 638 HP (476 kW) | Power Boost: 58 HP (43 kW)
- 2100 rpm
- Two-Stage Turbocharged, Inter- & Aftercooled
- Hydraulic fan drive
- Tier 4B / Final | Cleanup Catalyst (CUC): standard | Diesel Oxidation Catalyst (DOC): standard
- Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF): SCR w/ DEF | Exhaust Pipe: Vertical stack
- Quantity: 6
- 787 in³ (12.9 L)
- 5.31 in (135 mm)
- 5.91 in (150 mm)
- PowerDrive, Full powershift | Speeds: 16F / 2R
- Independent
- 1000 rpm
- Inboard Compound Planetary
- Configuration: Frame Articulated
- High Pressure Common Rail | Control: Electronic
- Direct
- Service: Wet disc
- 710/70 R42, R1W Duals
- 710/70 R42, R1W Duals
- 4 Tracks
- Rated: 240 Amps
- System Rating: 12 V System; 24 V Start
- 25 mph (40 kph)
- Pressure Flow Compensated | Standard Remote Valves Quantity: 4 std
- Single pump std
- Implement Pump: 42 gpm (159 lpm)
- Axle Output End: Bar | Drawbar: Category 4
- 3-Point Hitch Category: Category 4N Quick Coupler | Draft Link Ends Telescopic: Quick Coupler
- With Hitch/Drawbar: 300 in (7615 mm)
- To Top OF The Cab: 156 in (3963 mm)
- 120 in (3048 mm) bar axles
- 5.5 in (140 mm)
- 154 in (3912 mm)
- 455 gal (1722 L)
- 24 in behind pin: 19,621 lbs (8900 kg)
- DEF: 66 gal (250 L)
- Total allowable, w/maximum ballast: 66,000 lbs (29937 kg)
- 50,328 lbs (22828 Kg)
- Block Design, Replaceable Liners: Wet liners | Shuttle (Forward-Reverse): Yes
- 3-Point Hitch: Three Position, Lift, Hold, Lower
- ZHF314267
- $359,900.00
- Charleston
- Pre-Owned
- 15505
- 2018
- Case IH
- Steiger® Series Steiger® 580 Wheeled
- 12.9 L, Two-Stage Turbo
- 3892
- Axle Output End: Bar | Drawbar: Category 4
- PowerDrive, Full powershift | Speeds: 16F / 2R
- Available
- To Top OF The Cab: 156 in (3963 mm)
- ZHF314267